|
1. |
|
Winkler, M., G.Kress,
Modeling of Corrugated Laminates, Composite Structures, 109: 86-92 (2014) |
|
2. |
|
Kress, G., Examination of Hashin’s
Failure Criteria for Part B of the Second World-Wide Failure Exercise:
Comparison with Test Data, Journal of Composite Materials, 47(6-7): 867-891 (2013) |
|
3. |
|
Kress, G., Examination of Hashin's
Failure Criteria for the Second World-Wide Failure Exercise, Journal of
Composite Materials, 46(19-20): 2539-2561 (2012) |
|
4. |
|
Winkler, M., G. Kress, Influence of Corrugation
Geometry on the Substitute Stiffness Matrix of Corrugated Laminates, Composite
Structures, 94(9): 2827-2833 (2012) |
|
5. |
|
Kress, G., M. Winkler, Corrugated Laminate Analysis:
A Generalized Plane Strain Problem, Composite Structures, 93(5):1493-1504
(2010) |
|
6. |
|
Winkler, M., G. Kress, Deformation Limits for for Corrugated Cross-Ply Laminates, Composite
Structures, 92(6): 1458-1468 (2010) |
|
7. |
|
Kress, G., M. Winkler, Corrugated Laminate
Homogenization Model, Composite Structures, 92(3):795-810
(2010) |
|
8. |
|
Kress, G., M. Winkler, Honeycomb Sandwich Residual
Stress Deformation Pattern, Composite Structures, 89(2):
294-302 (2009) |
|
9. |
|
Sauter, M., G. Kress, M. Giger,
and P. Ermanni, Complex-Shaped Beam Element and
Graph-Based Optimization of Compliant Mechanisms, Struct
Multidisc Optim, 36(4): 429-442, (2008) |
|
10. |
|
Keller, D., G. Kress, and P. Ermanni,
Strength-Optimal Onsert Shapes, Composites
Science and Technology, 68(12): 2376-2382 (2008) |
|
11. |
|
Roos, R., G. Kress, and P. Ermanni, A Post-Processing Method for Interlaminar Normal
Stresses in Doubly Curved Laminates, Composite Structures, 81(3):
463-470 (2007) |
|
12. |
|
Roos, R., G. Kress, M. Barbezat,
and P. Ermanni, Enhanced Model for Interlaminar
Stress in Singly Curved Laminates, Composite Structures, 80(3):
327-333 (2007) |
|
13. |
|
Kress, G., M. Sauter, and
P. Ermanni, Complex-Shaped Beam Finite Element, Finite
Elements in Analysis and Design, 43(2): 112-126 (2006) |
|
14. |
|
Kress, G., P. Naeff, M. Niedermeier, and P. Ermanni,
The Onsert: A New Joining Technology for Sandwich
Structures, Composite Structures , 73(2): 196-207 (2006) |
|
15. |
|
Hunold, M., G. Kress, and P. Ermanni, Nonlinear Fiber Based retaining System, Composite
Structures, 72(2): 227-235 (2006) |
|
16. |
|
Kress, G., and P.
Ermanni, Tragende Sandwichstrukturen dank Onsert Technik, Adhaesion 4
(2005) |
|
17. |
|
Kress, G., R. Roos, M. Barbezat, C. Dransfeld, and P. Ermanni, Model for interlaminar Normal Stress in Singly
Curved Laminates, Composite Structures, 69(4): 458-469 (2005) |
|
18. |
|
Kress, G. and P. Ermanni, Comparison between Newton and Response-Surface
Methods, Struct Multidisc Optim, 30: 368-380 (2005) |
|
19. |
|
Kress, G., D. Fritsche,
and P. Ermanni, Failure Criteria and Onsert Shape Optimization, Int. J. Adhesion and
Adhesives, 25:109-120 (2005) |
|
20. |
|
Kress, G, M. Siau, and P. Ermanni, Iterative Solution Methods for Damage
Progression Analysis, Composite Structures, 69 21-33 (2005) |
|
21. |
|
Kress, G., P. Naeff,
M. Niedermeier, and P. Ermanni, Onsert Strength Design, Int. J. Adhesion
and Adhesives, 24(3): 201-209 (2004) |
|
22. |
|
Kress, G., Shape Optimization of a Flywheel, Structural
Optimization, 19(1): 74-81 (2000) |
|
23. |
|
Nayfeh, A.H., and G.R. Kress, Non-Linear
Constitutive Model for Plain-Weave Composites, Composites Part B:
Engineering 28(5-6): 627-634 (1997) |
|
24. |
|
Kress, G. and W. Becker, Effective Tensile Stiffness
of Finite-Width Quasi-Isotropic Laminates, Reinforced Plastics and
Composites, 14(10): 1043-1053 (1995) |
|
25. |
|
Kress, G., Minimized Computational Effort for the
Thick-Walled Composite Tube Problem, Computers and Structures, 54(4):
633-639 (1995) |
|
26. |
|
Becker, W. and G. Kress, Stiffness Reduction in
Laminate Coupons Due to Free-Edge Effect, Composites Science and
Technology, 52: 109-115 (1994) |
|
27. |
|
Kress, G., Free-Edge Influence on CFRP-Laminate
Strength, Int. Jour. Damage Mechanics, 3: 194-211 (1994) |
|
28. |
|
Kress, G., Analytische und experimentelle Untersuchung
zu Versagensvorgaengen in Faserverbundwerkstoffen mit besonderer
Beruecksichtigung der Randeffekte, Fortschr.-Ber. VDI, Reihe 18 Nr.
130 (1993) |
|
29. |
|
Kress, G. Randeffekte in multidirektionalen
Faserverbundlaminaten und Steifigkeitsmessung im Zugversuch, Materialpruefung,
34(10): 321-324 (1992) |
|
30. |
|
Kress, G., Width Influence on Stiffness Measurements
of Multidirectional CFRP Laminates Under Uniaxial Load, Composites
Engineering, 2(2): 83-90 (1992) |
|
31. |
|
Schanz, U., G. Kress, Influence of
Temperature and Moisture on Total Strain-Energy Release Rates Associated with
Edge Delamination of Composite Test Coupons, Composites Science and
Technology, 35 (3): 219-233 (1989) |