TIAN (TIM) CHEN

Engineering Design and Computing Laboratory (EDAC)
Department of Mechanical and Process Engineering (D-MAVT)
Swiss Federal Institute of Technology (ETHZ)
CLA F34.2, Tannenstrasse 3
Zurich, 8092, Switzerland
email: ttc@ethz.ch
Tel.: +41 78 835 07 23

PERSONAL INFORMATION

Date of birth: 31.12.1987
Nationality: Canadian
Website: timchen.ca

EDUCATION

Doctor of Sciences, Mechanical and Process Engineering Sept. 2018
ETH Zurich, Switzerland
Advisor: Kristina Shea
Visiting Researcher, Mechanical and Civil Engineering June - Oct. 2017
California Institute of Technology, USA
Advisor: Chiara Daraio
Master of Science, Civil Engineering, Cum Laude June 2014
Delft University of Technology, the Netherlands
Advisor: Pierre Hoogenboom
Bachelor of Applied Science, Engineering Science, Major: Infrastructure Engineering June 2010
University of Toronto, ON, Canada

PROFESSIONAL EXPERIENCE

Graduate ResearcherSept. 2014 - Sept. 2018
Engineering Design and Computing Laboratory (EDAC), ETH Zurich, Switzerland
  • Designed multi-stable deployable structures that are entirely 3D printed.
  • Proposed an autonomous actuator that combines mechanical instability and shape memory effect of polymers.
  • Designed an autonomous directional 3D printed swimming robot that follows a given path and delivers a payload.
  • Optimized truss structures by nodal coordinates and member sizes using convex programming.
  • Realized an autonomous deployable solar panel array that expands its area by a factor of ten.
  • Advised five master theses, and nine projects at master and bachelor levels.
  • Published six journal articles with five more under preparation.
  • Extensive use of algorithmic design tools, numerical methods, and experimental apparatus.
Junior Structural EngineerJune 2013 - June 2014
Arup, Amsterdam, the Netherlands
  • Developed the structural concept for a competition bid of the European Investment Bank.
  • Contributed to the structural concept of a indoor ski center in Shanghai, China.
  • Assisted in the structural analysis of the Arnhem Bus Terminal in the Netherlands.
  • Designed the support structure of a potential 3D printed building, the Landscape House in the Netherlands.
  • Analysis of the structural framework of the Havenhuis in Antwerp, Belgium, with a focus on the joint design.
Junior Structural DesignerNov. 2010 - Apr. 2012
Morrison Hershfield, Toronto, ON, Canada
  • Overnight bridge inspection, focusing on corrosion level in the reinforcing steel.
  • Inspection of culverts and tunnels both at deck level and of the substructure.
  • Design and CAD of the drainage systems of rural train stations.
  • CAD of train rail placements at a major train station in Toronto.

TECHNICAL SKILLS

Technical CompetenciesSoftware packages
  • Numerical analyses - FEM, CFD
  • Mathematical programming
  • Analysis - Numerical, Symbolic
  • Algorithmic design
  • Scientific programming
  • Experimental work
  • Abaqus, ANSYS, Fluent
  • Oasys GSA, SAP2000
  • Rhino3D, Grasshopper
  • NX, Catia, Solidworks, Revit
  • Matlab, Python, Maple
  • HMTL, CSS, Javascript, PHP, AJAX

SUPERVISION

Master Theses
  1. Koh, M., (2017), "Designing Activated Buckling Structures Using FDM 3D Printing".
    Current Position: Research assistant at EDAC, ETHZ.
  2. Du Pasquier, C., (2017), "Modular Pneumatic Toolkit: an Application of 4D-Printing".
    Current Position: Doctoral candidate at EDAC, ETHZ.
  3. Wagner, M., (2016), "Design of 3D Printed Active Stuctures Using Shape Memory Polymers".
    Current Position: Doctoral candidate at Laboratory of Nanometallurgy, ETHZ.
  4. Liu, J., (2016), "Mechanical Properties of Multi-Material Structures Fabricated with Inkjet 3D Printing".
    Current Position: Omron Automotive Technologies, Inc., Toronto, ON., Canada.
  5. Zimmermann, L., (2015), "Generative Design through the Combination of 3D Shape Grammar and Simulation".
    Current Position: Doctoral candidate at EDAC, ETHZ,
Other Projects
  1. Ulrich ,L., (2018), "Effect of Poisson's Ratio on Energy trapping Meta-material". In progress.
  2. Sala, J., (2018), "Design of Rotational Multi-stable Joints". In progress.
  3. Volk, C., (2018), "Magnetically Controlled Reversible Appendage". In progress.
  4. Mueller, M., (2018), "Passively Actuated Photovoltaic Array". In progress.
  5. Freitag, J., (2017), "Synthesis of a Reversible Shape Memory Polymer for Stereolithography". In progress.
  6. Fritzsche, D., (2017), "Shape Transforming Polymer Sheets".
  7. Sesseg, J., (2017), "Synthesis of Light Activated SLA Resin".
  8. Felber, R., (2017), "Light Controlled 3D Printed Rotating Platform".
  9. Koh, M., (2016), "Design and Analysis of 3D Printed Bistable Structures".

TEACHING DUTIES

Teaching Assistant - Engineering Design Optimization
D-MAVT, ETH Zurich
2015-2018
Teaching Assistant - CAD and Technical Drawing
D-MAVT, ETH Zurich
2014-2015
Teaching Assistant - Structures and Materials
Engineering Science, University of Toronto
2010
Teaching Assistant - Praxis II
Engineering Science, University of Toronto
2009

MEDIA MENTIONS

Rethinking Intelligence
ETH Zurich, World Economic Forum
2017
3D printing unlimited: From tooth enamel to 4D printing
ETH Zurich Globe Magazine: Manufacturing redefined, Issue:4
2017
Researchers Achieve 4D Printing of Programmable Shape-Changing Structures
Mary Ann Liebert, Inc., publishers
2017
ETH Zurich's 4d Printed Structures Self-Deploy and Have Shape Memory
3D Printing Industry
2017
Fabrication technology in the fourth dimension
ETH Zurich News (English)
2017
Die vierte Dimension in der Fertigungstechnik
ETH Zurich News (German)
2017
ETH Zurich Researchers Develop Load-Bearing 4D Printed Structures
3D Printing
2017
Eth zurich demonstrates self-assembling 4d printed "deployable and active" trusses
3D Printing Industry
2017
Watch 4D-printed object become a sturdy dome - Futurity
Futurity
2017
Fabrication technology in the fourth dimension
EurekAlert!
2017
Neues Verfahren ermoeglicht Drucken in der vierten Dimension
APA (German)
2017
Die vierte Dimension in der Fertigungstechnik
Informationsdienst Wissenschaft (German)
2017
Die vierte Dimension in der Fertigungstechnik
Jura Forum (German)
2017
Arrivano le stampanti 4D: gli oggetti potranno cambiare forma nel tempo
La Repubblica (Italian)
2017

DISTINCTIONS AND AWARDS

Cum Laude (graduating top 5%)
Delft University of Technology
2014
Gordon Cressy Student Leadership Award
University of Toronto
2010
Spirit of Engsci Award
Engineering Science, University of Toronto
2010
Engineering Society Award
Engineering Society, University of Toronto
2010