Can be used to connect a normal IDE harddisk to the Paravision SX1. Paravision was earlier known as Microbotics.
(To the controller)
(To the Harddrive)
37 PIN D-SUB FEMALE to the controller.
40 PIN IDC FEMALE to the harddisk.
Description | D-Sub | IDC |
---|---|---|
Drive Reset | 1 | 1 |
Data bit 0 | 2 | 17 |
Data bit 2 | 3 | 13 |
Data bit 4 | 4 | 9 |
Data bit 6 | 5 | 5 |
Ground | 6 | 2 |
Data bit 8 | 7 | 4 |
Data bit 10 | 8 | 8 |
Data bit 12 | 9 | 12 |
Data bit 14 | 10 | 16 |
Ground | 11+12 | 19 |
Ground | 13+14 | 22 |
Ground | 15+16 | 24 |
Ground | 17 | 26 |
5V Power | 18 | n/c |
5V Power | 19 | n/c |
Ground | 20 | 30 |
Data bit 1 | 21 | 21 |
Data bit 3 | 22 | 22 |
Data bit 5 | 23 | 23 |
Data bit 7 | 24 | 24 |
Ground | 25 | 40 |
Data bit 9 | 26 | 26 |
Data bit 11 | 27 | 27 |
Data bit 13 | 28 | 28 |
Data bit 15 | 29 | 29 |
I/O Write | 30 | 23 |
I/O Read | 31 | 25 |
Interrupt Request | 32 | 31 |
Address bit 2 | 33 | 36 |
Address bit 1 | 34 | 33 |
Address bit 0 | 35 | 35 |
Chip Select 1 | 36 | 38 |
Chip Select 0 | 37 | 37 |